How To Use
Step 1
Fill the pot about halfway with hard wax beads. Set the dial to max to start the melt. As beads melt down, top off until you reach your working volume.
Step 2
Wax is ready when it lifts off the spatula like thick honey — smooth, glossy, no clumps. If it strings or runs off, it's too hot. Drop the dial to working temp and wait 30 seconds.
Step 3
Spread wax in the direction of hair growth, pressing firmly so it adheres. Leave a thicker edge — a small lip — at the end of your strip to grab onto for removal.
Step 4
Once set, hold the skin taut and pull the lip back quickly, parallel to the skin (not upward). Apply post-wax oil to soothe and remove residue, then move to the next section.
which size is right for you
Double Hard Wax Warmer - 2lb
Product Specifications
- Warmer Weight: 2lb / 1kg
- Well Capacity: 1000ml Capacity.
- Two 45°C – 105°C Adjustable Temperature Dials.
- 110-120 Volt U.S. Standard 350 Watts.
- Inner Pot Measurements: 4” W x 7 1/2” Deep.
- Warmer Measurements: 14.5” W x 5” H
Professional Large Hard Wax Warmer - 5lb
Product Specifications
- 5lb/2.26kg capacity
- 10-120 Volt 60Hz 300 Watts
- Aluminum Wax Pot
- Inner Pot Measurements: 6.9” W x 5.2” Depth
- Warmer Measurements: 11.9” L X 9.7” W X 8.4” H
Premium Extra-Large Hard Wax Warmer 10lb
Product Specifications
- 10lb/5kg/5000 ml Capacity
- Aluminum Wax Pot
- 0°C – 120°C Adjustable Temperature Dial
- 110 Volt U.S. Standard 450 Watts
- Inner Pot Measurements: 7.87” W and 8.59” Depth
- Warmer Measurements: 13.46” L x 11.46” W x 6.89” H
Premium Large Hard Wax Warmer - 5lb
Product Specifications
- 5.5lb/ 2500ml/ 2.5kg Capacity
- 45°C – 105°C Adjustable Temperature
- 110-Volt U.S. Standard 350 Watts
- Inner Pot Measurements: 6.9” W and 5.2” Deep
- Warmer Measurements: 13.5” L X 11.5” W X 6.9” H
FAQ's
It's ideal for large salons, spas, or waxing establishments with a consistent flow of clients.
Due to its large capacity, approximately 30-40 minutes, but can vary based on the wax type.
Yes, despite its large size, it's designed to be energy efficient while maintaining optimal wax temperature.
No, this warmer is exclusively made for hard wax only.
Certainly. The design ensures even heat distribution for a steady wax consistency. However, to maintain proper wax consistency and temperature, it’s imperative to adjust the temperature throughout the service and stir the wax.